INSTALLATION INSTRUCTIONS:
You will need:
-included standoff sign mounts, screws and plastic expansion anchors. (If you are using your own wall plugs, please follow the manufacturers’ instructions)
-a pencil/marker, a tape measure, a hammer, a spirit level and a drill.
-an assistant if needed.
1. Take measure from floor to highest point of the weekly planner to get the desired height, check that the weekly planner is straight using a spirit level and mark the screw positions through the screw holes.
2. Drill holes in the wall where marked for the screw positions.
3. Push wall plugs into the holes using lightly a hammer.
4. Put screws into the base parts of the mounts (longer part) and add both of them into the holes.
5. Leave one nylon washer behind of the weekly planner and one front of the weekly planner.
6. Place the weekly planner on the wall and fix caps top of the mounts.
